2004 Hyundai Santa Fe "remove front bumper 2001" Questions

...front bumper there is a nickel size Philips head plastic screw. Remove it then remove the radiator cap. Made a video showing how to replace the radiator on my 2005 Hyundai Santa Fe and in the process ...

remove the front facia (bumper to get access to the fog lamp assemblies as they are bolted in from behind. No big deal. There are a few screws along the top of the facia under the hood along with some

...front bumper on a 2001 ford focus There are 4 bolts (upper) that fixes the bumper, under the bumper, there are bumper sliders as well as the sides. Remove the 4 bolts, fender linings and slide off ...

...front end collision and is cracked in several places. I have found a replacement but need to know how to remove it and install the new one. The grille also needs to be replaced. If you look around on ...

...front of vehicle, remove radiator grill, remove the headlamps, disconnect the wiring from the indicators and fog lamps. undo the screws holding wheel arch liner to front wings (1 each side) and the ...

...remove the front bumper? Grab a factory service manual it will make it much easier, plus you may need to remove other parts as well. Here is link to a factory service manual for your 2001 Nissan ...

...at r and l side splash sheils, remove t 50 torx bolts under bumper cover on either sdie of where the front lic plate cover goes, pull away from body of vehcile and disconnect the fog lights if ...

remove and repeat for the other side. Then its 3 10mm bolts that secure the front under tray (if yours has one). Then there will be another 10mm bolt to the wing side of the headlamp from a above veiw

...Remove the front bumper cover. Remove the tool box and the luggage compartment trim (carpet). Remove the 2 bolts and the nut. ... To install:. Toyota Tacoma Retainer, front bumper filler, no.3 Toyota ...

...remove all attaching hardware that attaches the bumper>reinstall and align front bumper install bumper cover and align, and paint as neccessary, I wouldtake it to a body shop and have it ...