2004 Hyundai Santa Fe "ignition control module 2 v6" Questions

...ignition timing, fuel injector pulse width, cruise control operation, etc). Best you have this system diagnosed by a professional technician who knows the system. I have de same probem with my Santa ...

...Control Module) has received a Signal that your you have a problem with your Throttle Body. #3) P1178-->> this Code is Indicating that Your Electronic Throttle Motor Battery has a Open Circuit. ...

...ignition control module by pressing down on the locking tab where it is stamped PUSH, and remove the connector. Remove the ignition module and the module bracket from the front fender apron. Unfasten ...

...ignition amplifier cylinders 1 and 452 As above for 2 and 5 (on a V6)53 As above for 3 and 6 (On a V6 too)54 Immobiliser control module to engine control module malfunction (comes on if you have ...

...Ignition Distributor Assembly and Powertrain Control Module (PCM) 1 - Wiring 1 - Manifold Absolute Pressure (MAP) Sensor 1 - Cylinder Head Gasket(s) 1 - Powertrain Control Module (PCM) Wiring 1 - ...

motor will not start no spark 2-5 v6 engine jxi 2 things to check . crank position sensor or the ignition control module in the distributor

...ignition control module in 1998 K-1500 5.0 liter vortec 5.0 liter vortec engines This system does not use the ignition module used on the DI systems in the past. The VCM controller now controls the ...

...ignition control (IC) system. The ignition system uses a primary and secondary sub system in order to accomplish the timed spark distribution. The primary system consists of a low voltage trigger ...

...v6 2-5 litre check the ignition control module in the distributor or the crank position sensor When my Acura does that it usually is caused by loose screws inside the distributor and/or on the

are as follows: ?€¢ The ignition lock cylinder ?€¢ The ignition switch ?€¢ The passlock sensor ?€¢ The EVO/Passlock module ?€¢ The security indicator ?€¢ The vehicle/powertrain control module (VCM/PCM