2000 Hyundai Accent "jump started headlights dont work" Questions

jump started, this could have caued them to blown, but believe me its a billion t one chance them all blowing at once. My bet is more than likely a fuse has blown or the headlight switch/dimmer switch

...dont work My dash lights and headlights flicker and speedo needle jumps and now my wipers are not working If the car cranks well then might have a loose connection to dashboard or a bad ground. I ...

jump started my car the other day and touched the jumper cables together while they were still hooked to my car. Don't know if that did anything, but after that I have no headlights or radio, and only

jump started from live running other car. if true then make sure headlights work , if they dont work fix that first. HL must always work, even keys in pocket. best is to put a fully charged battery in

started out with headlights out then the speedometer, odometer, gas gauge, oil, battery, rpm's are not working, fixed the headlight was a fuse but other stuff still won't work. none of my gauges are ...

...headlights and blinkers do not work however radio, blower, wipers and flashers do work. When jumping solenoid engine cranks but does not start. I had a buick that this happened to and I stumbled ...

...dont it could be a broken main feed wire to that portion of the fusebox. But before jumping to that conclusion check the fuse box and relays under the hood for any bad relays, swap the relay for ...

...jump start it if battery is low. if the battery is good then you may have a bad starter or a problem with the antitheft system,again start with the battery, make sure inside ;ight are working and ...

...headlights and running lighs dont work properly the head lights bealy come on and my running lights jest dont work whats the problom and if u have the wiring code put it down plz Hi, How's your ...

...jump the starter but didnt work. Replaced starter and it starts great. But now my headlights and dash lights dont work. Found a blown fuse,replaced fuse still no lights. What can i do? Go back under ...