2000 Hyundai Accent "change wheel bearing" Questions

...axle when the wheel turns. If its a newer car you may have to change the whole wheel assembly as they don't change just the bearings any more. On the real old cars I used to do it myself but no

...change a front wheel bearing on my hyundai excel 1997 My Hyundai excel 1997 model needs a front wheel bearing changed on the pasanger side its not the brakes as my friend has had a similar problem ...

...change indicated it was important that the right frong tie rod end and wheel bearing be replaced on an 2000 Hyundai Accent with 100k miles. Is the tie rod replacment hard? Do you need a press for the ...

...comes with new bearings when you replace it, it's a easy change, remove wheel, remove the brake calliper, remove the front axel nut and the hub should come off, hope this helps, it's a easy ...

...change 2 back wheel bearing, But when i drive it i still hear funy noise coming from back wheels.What should i do? Hello, My name is mike, I will try and help you out best I can with out of course ...

wheel bearing left front change wheel bearing left front you need a professional to do this job-who has alot of tools and a big hammer- Denny

...wheel bearing is bad - when it is, the friction inside the hub goes up and the hub gets heated, sometimes to scalding temperatures. You should immediately look into getting this handled - a fully ...

...A BEARING IS GOING OUT. IT WILL BREAK AND COST ALOT MORE TO FIX AND MIGHT EVEN CAUSE YOU TO LOSE STEERING. IF IT IS A WHEEL BEARING IT COULD LOCK A WHEEL UP ARE EVEN FALL OFF. PLEASE GET THIS ...

...it is more common and grinds when i'm not turning but it still isn't a permanent grinding. change end of drive shaft the constant velocity joint .also wheel bearing at the same time for good ...

...change the back wheel bearing on a 2000 Hyundai Accent do you know what I should torque the nut at I hope you can help me. Thanks alot John Their shop website says below but you can call the service ...