Hyundai Motor 1999 Elantra "front hub" Questions

Ad

Question about Hyundai Elantra

1 Answer

hub comes out the front. The bearing comes out the back. There is a snap-ring (large one) on the inside of the knuckle which must be removed before you can press out the bearing inner race (you'll

Ad

...front hub and bearing With the car on ground, break loose the drive-axle nut, and the wheel nuts , than jack up the car, support it properly, remove the wheel ,remove the axle-nut. Remove the brake ...

Ad

front hub. Remove the split pin, then remove castle nut and washer from the front hub while applying the brake. Remove the caliper mounting bolts, and hang the caliper assembly to one side. To prevent

Question about Hyundai Elantra

2 Answers

hub comes through front and into bearing, which also requires press fit. You'll have to remove entire spindle/knuckle assy, and at least get it in a vise or on a bench. It can be done without a press,

front wheel bearing assembly on 2001 Elantra. Will I need to press the old one out or will it tap out? tap it out? yep!! with a BIG! hammer or rent a puller to take it out it's called a sealed hub . a

Question about Hyundai Elantra

3 Answers

...front wheel stud is broken need to fix it The studs press out and in. Perhaps a hammer would work. Replacements studs can be purchased. Need to remove hub, of course. Take of wheel, Next remove out ...

Question about Hyundai Elantra

2 Answers

...HUB. REMOVE LARGE NUT. MAY NEED TO REMOVE COTTER KEY FIRST, THEN NUT COVER. FRONT BEARING, AND WASHER WILL COME OUT WHEN YOU WIGGLE DRUM. TAKE DRUM OFF, AND TURN OVER. REMOVE SEAL, AND REAR BEARING. ...

front end is gone But something is not right now with sounds from back end of car. well if he tighten the wheel hub bearing nutt to tight it will cause the hub bearings to burn out.....But he is a tec

...front hub or wheel bearings on this puppy? Can a drive axle make such a noise? Thanks to everyone for suggestions! That's a hub bearing. Replace the one that's doing it. I'm assuming this 'roar' is ...

how do I remove front rotors from a 2003 hyundai elantra First jack the front end up. Then remove the wheels. Then remove the calipers. Then the rotors should fall right off the car into your hands. ...

Not finding what you are looking for?
Hyundai Motor 1999 Elantra Logo

284 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Hyundai Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...