Hyundai Motor 1998 Accent "timing 1" Questions

...1 tooth, how can I tell? How If I get an error code of 0340 after my timing belt replacement on a 2005 Hyudai Accent, my cam could be off by 1 tooth. if my cam is off by 1 tooth, how can I tell? How ...

...you forgot to plug in the cam sensor, Or you have the cam that the sensor reads off of 1 tooth off. Check to see if its plugged in if yes remove the upper timing cover and see if everything lines

...timing marks are, dot on camshaft pulley and mark on cylinder head at approx 4 o'clock, crankshaft marks are dot on crankshaft pulley and dot on engine at approx 1 o'clock hpoe this helps Regards ...

1.6 The timing marks allow the engine to be correctly timed . It depends on what you are trying to do . If you are just trying to time the engine with a timing light .Then the mark that you would look

p0030 and p0134 error come up replace 02 sensor 1 car ran 9 days now error codes are back replaced sensor 2 time car will not run right any ideas i read check heater circuit fuse , can't find one ...

...timing belt cover. make sure cylinder #1 is set at TDC. making sure all components are properly aligned and loosen pensioner to remove old timing belt. Install new timing belt. Tension belt, ensure ...

hi, i need the front bumper for a hyundai coupe f2 evo, can you help? ebay. i got one there from a 1 being broke they do come up from time to time and cheap

code keys for hyundai number kmhcg45c82u371594dai dealer only or locksmith only, (if they do cars at all) 2 possibles. posted now 10,000 times here, and googled same 1 miillion times.

timing.adrian,,,, Have someone get their ear down near the head mating surface while the engine is being turned over, and see if they can hear air whooshing through a gap or something. Verify that the

.. the crankshaft timing mark will be roughly in the 1 or 2 oclock positiona small dot on the front of the crankshaft gear will need to line up with with a small dot or notch on the oil pump housing..