1997 Hyundai Elantra "cluch plate" Questions

...it just wouldn't start at all. Battery is fully charged and starter motor is not faulty. It maybe your cluch cable stretched out or out of ajustment.Could even be the cluch finger plate is wore ...

...I checked the fluid and its ok. Could it be the cluch and pressure plate??? If it lost power while shifting, and didnt engage, or lost power while accelerating, it is probably your pressure

...with the cluch in it still moves so its not disingageing How long have you had your car? How many miles on it? Maybe the clutch plate gone, if the plate is not thick enough, you won't change the

...still slipping and more so now, is there an ajustment on the cluch and wear? everytime you change a clutch, it is good practice to change the pressure plate also. in this case, thats what I would

...speed manuel. replces new cluch plate throut bearing , pressure plate and still makes same noise. sounds like noise is coming from front of tranny how about the fork? if it was wore it will make ...

...plate will not release cluch disk Many possible causes. If it's hydraulic clutch - air in the system. Broken spring on pressure plate. Warped clutch disc. Cracked clutch folk. If hydraulics ok , ...

...cluch operating leaver vw are you refering to the clutch fork that connects to the other end of the clutch cable, you will have to drop the gear box as this fork sits over the clutch pressure plate ...

...14 months ago ,no pressure at on cluch peddle will not go into any gear bad slave cylinder/hydrolic?-bad pressure plate/throughout bearing replace them it should fix it.ive been there

...cluch, im a woman that doesnt understand this, and hes says he needs a thousand pounds for the parts, is he ripping me off, or does this working cost that much !!!, many thanks Anita 1000 pounds ...

...clutch pressure and smooth shifting into all gears. clutch plate is worn out cluch is good just needs cluch plate but you might as well buy the clutch kit and change it all to avoid future ...