1997 Hyundai Elantra "cluch cable" Questions

Ad

...cable,failing this you mite need a clutch replacement.due to ware. im sorry to tell you this but your cluch needs to be looked at it could be out of adjustment (unlikley) as it has self adjusters on ...

Ad

...it just wouldn't start at all. Battery is fully charged and starter motor is not faulty. It maybe your cluch cable stretched out or out of ajustment.Could even be the cluch finger plate is wore ...

Ad

Question about Hyundai Elantra

3 Answers

...cluch and now my car will not start Who forgot to refit the crank sensor ,its on the bellhousing remember all the (ground) cables you removed to accheive this, make sure the starter is getting power ...

dosent pull the petal back (its a cable cluch) From what I am gathering. the pedal and cable assemblys are ok. then it is time to tear into the clutch its self. Sounds like the throwout bearing is bad

...this car has a manul cluch that just uses a cable.I just noticed you cant find slave. now I know its a cable, push the cluch in and out and if u see anything moving near the trans its cable

Question about Hyundai Elantra

1 Answer

cluch wont release renault been stood 18 months and cluch is stuck,nothing on the peddle how can i release it. check slave cylinder and line for leaks if not hydro. then its a broken cable

Question about Hyundai Elantra

1 Answer

cluch plat and preashur plate to suit but , will i have to chang the flyweel no you should not have to change the flywheel they were all the same - but as the cable and clutch fork operate differently

...nissan pulsar and the cluch pedal is harder than the break iv tyres adjusting the cable but that doze nothing probably the cable is fraying and jamming in the case replace it with a new cable ...

Question about Hyundai Elantra

1 Answer

...cluch operating leaver vw are you refering to the clutch fork that connects to the other end of the clutch cable, you will have to drop the gear box as this fork sits over the clutch pressure plate ...

...cluch from springing it self back to its normal engaged state, so do you have any idea what would cause it If it is a hydraulic clutch system,,then you have a failure of the hydraulic clutch system, ...

Not finding what you are looking for?
1997 Hyundai Elantra Logo

290 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Hyundai Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...