...big end and main bearings, head bolts and cam shaft it is a twin cam motor. your assistance in this regard will greatly be appreciated. dear friend:here follows the settings in need: cylinder ...
...PLEASE. I need the torque setttins for my opel kadette 1600 se, top, big ends and mains. if anybody can help me with that it would be graetly appreciated. Conrod torque settings for opel cadett 1.6 ...
big ends torque settings head torque settings 10 mm bolts step 1 22 ft lbs. step 2 60 degrees step 3 additional 60 degrees 12 mm bolts step 1 26 ft lbs step 2 60 degrees step 3 additional 60 degrees
...torque settings please. dear friend-please find the settings you are looking for below: mains 30nm * 65 deg big-ends 26nm * 52nm cyl head 35nm * 65deg *65deg flywheel 130nm oil pump 15nm crank pulley ...
Question about Nissan Cars & Trucks
...big end bearings? The torque setting for Nissan A14 mains and big end bearings is typically around 60-65 Nm (Newton meters). Help in the link. I like to use a broader approach. Google year nissan ...
TORQUE SETTINGS ON MAIN AND BIG END BEARINGS WE NEED THE TORQUE SETTINGS OF THIS CARS MAIN AND BIG END BEARINGS Morning please advise on Torque settings for big end bearings on a ascent 1.3 X's please
Question about Kia Cars & Trucks
...the main and Big end torque settings on a Kia2700 1.3 workhorse I need to set the Torque settings for the Main and big end bearings Have a look on the link below: kia big end torque specs Google ...
Question about Hyundai Elantra
...Big end Torque settings: Tighten the main and big end bolts in sequential order and in two steps. Main bearings. Stage 1. 22 ft lbs. Stage 2. 44 ft lbs Big end bearings. Stage 1. 11 ft lbs. Then ...
Question about Hyundai Elantra
big+end+torque+specs Not too much information on the 2.2 diesel. A service manual is the best idea. .. Sure, here are the torque settings for the big ends and cylinder head on a 2012 Chevrolet Captiva
Question about Daewoo Cars & Trucks
...big end bearing caps please You are looking for the torque settings for big end bearings and main bearings on a daewoo matiz? Main bearings torques on a Daewoo Matiz 800cc (1999) Stage 1: 25-30 ...
107 questions posted
Usually answered in minutes!
1,180 Questions
1,029 Questions
656 Questions
508 Questions
493 Questions