Hyundai Motor 1995 Accent "broken light globe" Questions

Ad

Question about Hyundai Accent

1 Answer

...light etc) does not come on when I turn the headlight on. I think it is a fuse but not sure which one if you got the manual, it usually gives you where the fuses are and what they are. If the manual ...

Ad

broken wire from the light switch to the right side Next time, include year make and model for a better answer If it is a Great Wall 240X and one side of the park lights dont work change out the front

Ad

Question about Hyundai Accent

1 Answer

...Light switch, broken wire from switch or from the fuse box or broken wires from switch to rear end which should run down 1 side of car coming from front to rear via in sill [thats in the side by the ...

brake light switch and make sure that the power goes through make sure that you get power on the contact points of the globes. If there is no power you should trace the wires to where wires are broken

overhead lights by visor are on and wont turn off broken switches or switch,remove globe covers and remove the globes probably need to replace the assembly which should clip out

...broken , or is there is any discolourment in the globe itself , just change the one that is easiest to get first and test , then if that works fine , then you wont have to check any futher wiring ...

...light works on a switch that's is located on your transmission . so the problem is with the switch or fuse or maybe even globes are blown ? good luck. it most be busted,one blown fuse,loose loose or ...

...light switch to make sure it isn't broken. It's mounted on the brake pedal mechanism, so you'll have to crawl under the dashboard to inspect it. Typically, the switch has a post that contacts the ...

...wire connector, check with circuit volt light indicator, Ohm meter or other continuity tester. Wiring from pedal switch to light globe As above (maybe cut squashed or broken wiring) Hope this ...

broken.The interior light staying off when the door opens is common. It could be that a door plunger switch is sticking (they can corrode inside), or there is poor contact at each end of the dome

Not finding what you are looking for?
Hyundai Motor 1995 Accent Logo

156 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 Hyundai Accent
2000 Hyundai Accent

1,131 Questions

2001 Hyundai Accent
2001 Hyundai Accent

1,082 Questions

2002 Hyundai Accent
2002 Hyundai Accent

1,047 Questions

1999 Hyundai Accent
1999 Hyundai Accent

517 Questions

2003 Hyundai Accent
2003 Hyundai Accent

500 Questions

Top Hyundai Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...