2004 Saturn VUE "brake rear replacing shoes" Questions

rear wheel/brake noise My rear wheel/ breaks are making a progressively louder noise. It sounds like tread noise, like I have my winter snow tires on. I have 62,000 kms ( 40,000 miles) on both the ...

...rear brake shoes I finally found the little star wheel from the back of the brake plate. I originally was told to start with the screwdriver on the bottom of the wheel and rotate it up. I was able to ...

...rear shoes. Or did you also replace the disks and drums?? Either way you should be ok unless you also replaced the slave cylinders on the rears. The fluid flows back up to the Master Cylinder as you ...

...brake to drag just a little. I think sense it is coming from the rear of the vehicle i am going to lean towards it being a wheel bearing. One more thing you can try, push the emergency or parking ...

...Rear Brake System Standard Rear Brake Item Part Number Description 1 2069 Brake Shoe Hold-Down Spring Pin 2 ? Rear Wheel Cylinder Retaining Bolt (2 Req'd) 3 ? Washer (2 Req'd) 4 ? Anchor Pin (Part of ...

...rear brake shoes on 2004 honda accord Brake ShoesRemoval & InstallationTo Remove: Raise and safely support rear of vehicle. Remove rear wheel assemblies. Release parking brake. Remove brake drum. ...

Rear Brake Shoes and Wheel Cylinder Components. About half of all car manufacturers still use drum style rear brakes. Drum brakes are not as efficient as disc brake systems but, drum brakes are easily

...rear brake drums from hub and bearing assemblies after loosening the two brake drum screws. 3.Be sure that the parking brake pedal is in the release(most upward) position. 4.Completely loosen square ...

...rear brake drum to get to the brake shoes. i think your aware of how to change the brakes if im right and your problem is the rusted drum doesnt want to come off the only way to get the old drum off ...

...REAR BRAKE DRUM SUB-ASSEMBLY 1. Release the parking brake and remove the rear brake drum. If the rear brake drum cannot be removed easily, do the following:- 2.Remove the hole rubber and insert a ...