1997 Saturn SL "bleeding slave cylinder" Questions

slave cylinder with the rod out of the transmission and by pushing the rod into the slave cylinder several times, make sure you have plenty of dot3 brake fluid in the clutch master slave before you do

slave cylinder on a Saturn? I don't know anything about cars but my daughter has a 1997 Saturn SL and a friend has replaced the slave cylinder and the master cylinder but can not find a bleeder on the

slave cylinder hs a release on it. the new ones dont. need to know what part or release system i can purchase to bleed the clucth Usually these are replaced as assembly,with the clutch master cylinder

...slave cylinder pump the cluth pidal until its become hard just hold then open bleeder screw In this car, there is no bleed port provided. The hydraulic clutch system is closed and is sold only as a ...

...cylinder/slave cylinder on a 1996 saturn There would be a bleed nipple on it. It would be located near the bellhousing. Open nipple a little let fluod seep out until no bubbles in it. Make sure you ...

do you take the slave cylender out ? Did you try bleeding it?The ones I am familiar with, the slave cylinder is bolted onto the side of the bell housing at the point where your clutch lever sticks out

bleeding the clutch in a 2000 Saturn, where do you put the fluid in? is there a line you can follow from the clutch slave cylinder to the fire wall and does it go into the brake master cylinder? if so

...slave cylinder nipple is I need to bleed the air out of my clutch on a 96 saturn sl. where is the nipple on the slave cylinder? I just installed a new clutch master cylinder and was not able to bleed ...

...slave cylinder I guess if you could decide which you are talking about, the master or the slave, it could be answered. masters do not have bleed screws, slaves do. slave cylinders at the back wheels ...

slave cylinder and allow it to gravity bleed, with the cover off the master. DO NOT pump the pedal while you do this and make sure you don't allow the master cylinder to get run dry. Watch for bubbles