1995 Saturn Sl "front seat" Questions

...front driver's seat in a 95 saturn... I have no idea how to replace the seat..is there someone that can walk me through it????Please... seat frame base is held to floor with four bolts, one in each ...

...front seat to adjust manual seat on all the other SLs you remove the two seat hold down bolts which go in horizontally from the front, and two more which go in vertically in the rear. Disconnect the ...

...90s S models there were two screws holding the rails in front and two in back. remove those bolts, disconnect the battery and then the seat belt light wiring plug and the thing should come right

...i replace front two seats im my 03 ford fiesta zetec real easy there are 4 bolts in the seat 14 or 15mm just take the bolts and lift out throught the door/ Please rate my response thank you very ...

a front seat from a 1993 Saturn fit in a 1995 Saturn SC1 the SL seats were pretty interchangeable, so i would imagine the SC seats are as well. there are only 4 bolts so it does not take long to check

seat won't slide forward nor to the rear on the 99 the front seats are identical. assuming there was little change in 2000 you unbolt both seats and move the passenger seat over to the driver side

how to untangle seat belt seat belt is stuck in mechanism and tangled Is it front or back ,take the cover off,there is 2 clips on side stops belt left the clips belt well move

...clamps from a hardware store. Two horizontal bolts in from the front, two vertical bolts at the rear, disconnect the wiring harness and the thing is out of the car and easy to inspect the seat

...seat belt anchor moved from the rear upper corner of the door to the front of the door allowing you to get out without unfastening it. The screw and the motor are both subject to failure from age and ...

...front and back windows and disconnect connectors. my problem is that there are 2 sets of connectors on each side - the white connectors made the seat belts stop working.......But If i don't leave my ...