1991 Saturn SL1 "steering column centered driving" Questions

Ad

Question about Saturn SL1

5 Answers

...steering column) and put a paper clip on the A & B terminal and turn on the ignition and count the blinks and write them all down, and call up the Auto Parts store and read them off and they can ...

Ad

...steering column cover. 2. Put the shifter in drive position. 3. Move the shift lever clockwise until it stops (all the way to first gear position, then move it back two detent positions to the Drive ...

Ad

Question about Saturn SL1

2 Answers

...steering column by a screw nut. The steering column has splines, just make sure the wheels are straight, remove the nut and pull of the steering wheel, center the steering wheel and push it in ...

...steering column shroud opening during steering column shroud removal. This will prevent damage to the shrink wrap on the gearshift lever. 7. Remove the steering column lower trim mouldings. 8. On all ...

...steering column. now back in? Install the ignition switch to the steering column and tighten the bolts. Connect the back drive cable to the ignition switch. Install the spacer collar and the snapring ...

steering column. Check for continuity and that the button is fine..... furthermore the wiring harness from that button running along the steering column may have worn insulation and shorting out when,

Question about Saturn SL1

3 Answers

...steering column together the horn doesn't work. I don't know what else could be wrong and I don't have a diagram for the steering column. Any help would be appreciated. You missed something putting ...

Question about Saturn SL1

1 Answer

...column to acess the tilt u-joint bolts? if so how do I disconnect it from the lower assembly. it is surrounded by a plastic boot that goes through the fire wall.this is a front wheel drive 3.8 any ...

...steering column 1986 F150 Ford COUTESY OF EXPERT "C17HYDRO" With Key Disconnect the battery ground. On tilt columns, remove the upper extension shroud by unsnapping the shroud from the retaining clip ...

...steering column and lower it carefully. Remove the ignition switch and warning buzzer and pin the switch in the LOCK position. Remove the turn signal switch. Remove the snap ring and T-bolt nuts that ...

Not finding what you are looking for?
Cars & Trucks Logo

89 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1993 Saturn SL1
1993 Saturn SL1

219 Questions

1992 Saturn SL1
1992 Saturn SL1

102 Questions

Top Saturn Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...