1998 Land Rover Range Rover "noisy hydraulic lifters" Questions

...noisy -- and possibly cause accelerated wear of both parts.To measure (and adjust) valve lash, you need a feeler gauge. The gauge is slid between the tip of the valve stem and rocker arm (or the cam ...

...noisy -- and possibly cause accelerated wear of both parts.To measure (and adjust) valve lash, you need a feeler gauge. The gauge is slid between the tip of the valve stem and rocker arm (or the cam ...

...noisy replace.  Camshaft may be worn on the lobes or may have jumped timing if belt. hydraulic lifters have no valve lash adjustments if u have a tick do an oil change with a flush possible ...

...noisy, as in "ticking", then adjustment is not required on hydraulic lifters. Worn rocker arms, pushrods etc. all come into play, if necessary, and should be inspected and replaced as necessary. ...

...noisy lifter is number one....get an addititive like hyper lube and run it 20 min on the freeway,. lifters are hydraulic and get gummed up with a varnish like substance. an additive dissolves it and ...

...Noisy tappets what can it be low oil pressure, wrong oil filter, worn hydraulic lifters , worn rockers at valve stem ends worn rocker bushes wrong viscosity engine oil and engine is spelt ENGINE nt ...

...hydraulic lifter noisy - car first lost oil hose to turbo - before this lifters, etc. were fine- 2003 PT cruser w/ turbo that oil hose probably lost enough engine oil to starve lifters... but then ...

...hydraulic liters being noisy. im thinking that they needing replacing,try thicker fresh oil and filter this will help,I don t think theyre adjustable,theyre probably worn through are and just getting ...

noisy hydraulic lifter, is there any additive that works good in helping this? you may try adding a engine oil flush follow the instructions on the container if the lifter is blocked that may help but

noisy lifter Ticksfaster as it accelerates I would try an engine flush and oil change first. It probably has a hydraulic lifter that is not pumping up due to low oil viscosity, or dirt in lifter. If ...