Question about Land Rover Range Rover
...jack needs to be placed under the axle casing closest to the wheel you are removing. Range Rovers came from the factory with air suspension and jacking any place other than under the axle may result ...
Question about Land Rover Range Rover
jack with a minimum 1500 kg, (3,300 lbs) load capacity must be used. WARNING: Do not commence work on the underside of the vehicle until suitable axle stands have been placed in their correct position
jack stands placed under each frame rail A more convenient way of jacking is the use of a garage or floor jack. You may use the floor jack at the specified points in following the illustrations. Never
Question about Cars & Trucks
...jack stands under a frame or unibody support point, and NEVER under a suspension component that could move independently from the frame. - Block wheels that are in contact with the ground to prevent ...
...jack under the front cross member . (The big bit that connects the side frames under the sump). Lift as high as possible and place the jack stands under the chassis ( moulded rails ) where the ...
Question about Land Rover Range Rover
...jack stand under the AXEL. It can slip off the frame and crush you. A friend of mine died under a vehicle, and it was no fun. Repeat on other side. Once the stands are in place you can "walk" the ...
jack stands, are supports of various heights that sit on the floor. They are placed under a sturdy chassis member, such as the frame or axle housing, to support the vehicle. Once the safety stands are
Question about Land Rover Range Rover
...my vehicle If im placing the two ton jack stands under the frame to support the front end where am i supposed to be placing the floor jack to lift it in the first place?? lower ball joint, behind ...
placed under the vehicle? Jack stands are always a good idea when working under a vehicle. I would place them on the frame in a location that will not be in the way as you move about under the vehicle
...jack under the vehicle to change a tire? I do not currently have a jack but I've been told to use a hydraulic bottle-style jack. I also do not have an owners manual. under the suspension is the best ...
247 questions posted
Usually answered in minutes!
340 Questions
202 Questions
166 Questions
146 Questions
112 Questions