doesnt work.When pressed one of the buttons, both signal lights blinks twice. The other button does nothing. Car does not lock or unlock. Need to do it manually. Is it the car battery? Thank you :) It
Question about Hyundai Elantra
...now keypad doesnt work i left my lights on and my battery went dead. got a jump and now my keyless entry pad doesnt work. try closing and locking all the doors then unlock the drivers door with the ...
doesnt work and now the alarm system has been reset and we cant start the car it there anything we can do lock the car and hold key over for 30 secs then press/hold unlock button on remote for 30 secs
...unlock it with the key but not the remote. Any ideas ? yes try unlocking the door with the door switch and if that doesnt work then you may have a bad lock motor on the driver side door.. i hope this ...
...doesnt work automatically i have to manually lock it and use the key in the door to unlock it. if i do not lock the driver door then the keyless entry works for only the passenger door, but if the ...
...unlock again. Close door to finish programming. If it doesnt work, try it again but turn the key faster. You have to do it all pretty quick, but I had it done on the second try. yes and it took me ...
...unlock or lock with the remote keyless entry on both keys. one set of keys being the spare and never used it cant be the battery in the remote? could be, try installing a new battery on the spare ...
doesnt work or light up and power mirrors dont work. checked fuses, tryed new master control switch and checked wires in the door post, they all look good. cant figure out problem You can't figure out
unlock the doors or disarm the alarm. The second one does not either, but the battery was replaced in my primary one anyway. You may need to reprogram them or the primary may be bad, try replacing the
783 questions posted
Usually answered in minutes!
1,180 Questions
1,029 Questions
656 Questions
493 Questions
443 Questions