1996 Land Rover Discovery "replace tensioner pulley 1994 olds" Questions

Ad

Question about Land Rover Discovery

1 Answer

...Tensioner Pulley on 1994 F 350 Release belt tension and remove belt. You will need a 1/2" drive breaker bar or ratchet to release tensioner. Be sure to note routing of belt on pulleys for ...

Ad

Question about Land Rover Discovery

1 Answer

Replacing tension pulley I have a new tension pully, but I can't move the old one. It just keeps tightening the bolt on the pulley Some are left hand threaded

Ad

Question about Land Rover Discovery

2 Answers

...Replace the tensioner with one that is not frozen. I purchased a good used tensioner at a salvage yard for $10. All my belt squealing went away. Route the belt around the pulleys leaving the belt ...

Question about Land Rover Discovery

1 Answer

...replace the serpentine belt on my 2000 Isuzu Trooper, but am not able to create enough slack in the belt by loosing the tensioner to slip belt on. I don't want to pry the belt on. Any suggestions? ...

Question about Land Rover Discovery

1 Answer

Tensioner Pulley I need to replace the serpentine belt on my 92 Caprice. Can anyone tell me how to go about loosening the tensioner pulley on it? Sorry...I'm not being lazy, but my wife has the car ...

Question about Land Rover Discovery

1 Answer

...happening every time it rains? Two things first the belt might be too old and stretched and need replacement or 2 the tension pulley on the engine may be bad and need to be replaced/ ...

Question about Land Rover Discovery

1 Answer

...tensioner or idle pulley at full slack and it still won't go on. Any tips? You might have the wrong belt. Try this put the old one back on if it goes right on then you might have been sold the wrong ...

replace the fan belt. Which pulleys does it go around? I have a 1994 Land Rover Discovery V8i, and the fan belt has snapped. I have a replacement, but I need confirmation of which pulleys to place the

Question about Land Rover Discovery

1 Answer

...tensioner, it should have a black plastic pulley on it. Insert a 1/2 inch breaker bar in the hole thats on the tensioner, and pull to relieve the tension on the belt. Slip old belt off the pulley and ...

Question about Land Rover Discovery

1 Answer

...they are similar. Pull plastic front off the idler pulley. Put a wrench on it to release tension, slide old belt off slide new belt on. If your pulley has gone bad this is the best time to replace

Not finding what you are looking for?
1996 Land Rover Discovery Logo

261 questions posted

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...