2004 Kia Optima "teeth timing belt cam crank" Questions

teeth so replace it now car wont run.Put OBD2,scan,toolon it got code / crank shaft sensor circuit A.Help ,replace cks-sensor car will not run,and still have code Its possible the gears are not on the

teeth. Remove the timing belt from cam shaft pulley only. Move cam shaft pulley in reverse according to the number of teeth you counted. Make sure the crank shaft pulley is on the mark. Mount the belt

timing belt does not rotate want to know how to change it If you are turning your crank and the belt doesn't turn then I would check your cams and gears on them. check the belt for lost teeth and make

...the camshaft gears are not, your timing belt has the teeth stripped off. (Hopefully the teeth on the gears are okay!) how to put timing belt in the right position i need the points can any one help ...

...TIming belt because it jumped teeth, killing engine on road. No break but worn teeth. reassembled. with new belt. Replaced all belts, cam timing belt cover Results; Sysmptoms Ran Perfect before belt ...

...timing belt, but the engine light still on with the same code and the mechanic said it's the crankshaft sensor that needs to be replace, but after 3 or 4 ignition cycle the light will go off then ...

...timing belt due to pump locked up and all the teeth gone off belt now. 2.0 SOHC that after setting belt and timing correctly the car wont start but backfires a little. Timing marks are correct with ...

...teeth are there on the timing belt from one timing mark to the other on a 2000 subura forester. or from the cam sproket to the crank and to the other cam sproket. On EJ 25 motor teeth count is as ...

...as the old belt). Mark A ... W ...C ... DOUBLE CHECK THE NUMBER OF TEETH BETWEEN MARKS. Reverse installation for assembly. Ensure timing belt marks match up with the correct gear ...

...timing cover only as reference points for the cam pulleis (this is where I ran in to trouble). What is most important is that there are exactly 40 teeth on the belt between the marks on the cam ...