2004 Kia Optima "changed crank" Questions

2003 Kia Optima is cranking but not firing. I can 2003 Kia Optima is cranking but not firing. I can smell gas so that is not the problem change the crank senser.If still want start change the coil ...

...crank sensor code changed sensor still wont start crank sensor location Just because the crank sensor sets a code that does not mean the sensor is defective, it means there is a problem in the crank ...

...changed cam sensor checked crank sensor, I need an idea on what else to check Take to car to a diagnostic center, and they will attach a diagnostic machine to the car to see if it's the ...

car wont start now changed the timing belt and crank sensors. i lined up the cams and crank marks is there some thing i am missing is it firing or just turning over ?

...crank position sensor located, and how is it reached? Located near the crankshaft pulley usually. kia 2002 v6 2.7 no spark on no.1 and no4  have spark on 2&5 -3&6 have changed cam sensor ...

where is it located on engine (2006 KIA optima 2.5 4cyl.) the crank sensor & estimated time to change the crank sensor should be located on the left rear of the engine nearest the bell housing. ...

crank shaft reading changed crankshaft sensor the one by timming belt and also changed ECM relay but still have same problem seems this is common from my research but havent found the cure any one can

...changed timing belt, and AC belt, alternator belt is still ok, but it was my fault, I did not change crank shaft balance belt, it next to timing belt, this very important, timing belt and crank shaft ...

...changed (but was not driven for 1 day) I started it yesterday and it died again, it now won't even turn over. Any ideas what the problem is? Then you have a intermittent spark . Now do you have a ...

changed fuel pump and crank shaft position sensor. still turns over but wont start Is there compression int he cylinders? pull a plug and put your finger in the hole, and have someone try to crank the