...fan on my 2000 Kia sportage Blower Motor Removal & Installation To Remove: Evacuate and recover air conditioning refrigerant. Remove battery. Disconnect and cap A/C lines at evaporator tubes. ...
tube and the blower shield. Install the bolt into the instrument panel support. Attach the courtesy lamp and the blower electrical lead. If removed, install the ECM. Attach the wiring harness. Install
...air intake to the climate unit insidethe cab, and has default to full speed because it has shorted intenaly, its possibly the fan resistor that needs replacing its usually mounted near the blower ...
...tube from the motor. Remove the screws that retain the blower motor to the case. Remove the blower motor from the case. Inspect the flange of the blower motor for damage or distortion. Damage or ...
...tube and/or blower motor cover. Remove the blower motor retaining screws. Remove the blower motor from the A/C evaporator. To install: Install the blower motor in the A/C evaporator and tighten the ...
tube from the blower motor. Remove the four retaining screws. Turn the motor and the wheel assembly slightly to the right so that the bottom edge of the mounting plate follows the contour of the wheel
tube from the blower motor. Remove the four retaining screws. Turn the motor and the wheel assembly slightly to the right so that the bottom edge of the mounting plate follows the contour of the wheel
Blower Motor Chevy Cobalt Pontiac G5 05-10 1AAuto.com You-Tube video "guuQwZnRRqs" placeholder (do not delete) The dash has to be taken apart.The blower motor located in the HVAC control module panel.
1,578 questions posted
Usually answered in minutes!
1,058 Questions
918 Questions
753 Questions
343 Questions
275 Questions
