Hyundai Motor 2002 Sonata "inches 19 ft" Questions

ft. lbs. (19-25 Nm) and adjustment bolt to 14-20 ft. lbs. (19-28 Nm). 2.0L and 2.5L Sonata, Elantra and Tiburon: Pivot bolt to 14-18 ft. lbs. (19-25 Nm) and adjustment bolt to 105-132 inch lbs. (12-15

ft. lbs. (19-25 Nm) and adjustment bolt to 14-20 ft. lbs. (19-28 Nm). 2.0L and 2.5L Sonata, Elantra and Tiburon: Pivot bolt to 14-18 ft. lbs. (19-25 Nm) and adjustment bolt to 105-132 inch lbs. (12-15

...19 ft. lbs. 7- Step 1: 20 ft. lbs. 8- Step 1: 31 ft. lbs. 9- 83 inch lbs. 10- Stud bolt: 11 ft. lbs. 11- Step 1: 72 ft. lbs. 12- Bolts: 17-24 (M8) 16 ft. lbs. 13- Step 1: 33 ft. lbs. 14- Intake ...

...ft. lbs. (19 Nm) plus 30 degrees Rocker arm cover using a new gasket and tighten the rocker cover bolts to 89 inch lbs. (10 Nm) PCV valve to the rocker arm cover Coolant tube with the thermostat ...

19 ft. lbs. Step 2: bolts 1-10 29 ft. lbs. Step 3: bolts 1-10 Plus 60-65 degrees ⑦ Step 1: 20 ft. lbs. Step 2: loosen to 0 ft. lbs. Step 3: 14 ft. lbs. Step 4: Plus 85-95 degrees ⑧

...ft. lbs. (19-29 Nm). Install the starter assembly. Install the flywheel and clutch housing cover. Lower the vehicle and refill the crankcase with the specified engine oil. Start the engine and check ...

Removed the heads need to adjust the valves need to know the torque The torque specs for the valve are, step one is 97 inch lbs, step two is 19-28 ft lbs. Hope this helps.

...engine sequence to follow torque specification 03 Hyundai santa fe, 2.7L engine M6x38 mm bolts, 96--106 inch lbs. M8x38 mm bolts, 15-19 ft lbs. no sequence given in the specifications guide

...19 ft. lbs. valve lifter retainer bolt = 12 ft. lbs. water pump bolt = 33 ft. lbs. * inch pounds * balance shaft retaining plate bolt = 106 in. lbs. camshaft retainer plate bolt = 106 in. lbs. front ...

19 ft. lbs. (27 Nm).228 INCH/LBS best is always read the manual and no get bad answers online word of mouth answers wreck engines. top one is torquing M6 bolt to 100fl./lbs and not inch, oops stripped