Hyundai Lantra 1996 1.8l Could I get the torque settings for the head bolts. Thankyou. M1030 Nm (22 ft lb) + (60°+65°) + (60°+65°) M1235 Nm (26 ft lb) + (60°+65°) + (60°+65°)
...a 98 hyundai elantra The cylinder head bolts need to be torqued at 10MM bolts 22 FT-LBS 12mm bolts 26 FT-LBS + 60 degrees and then another 60 degrees.That torque will leave a blown gasket for
big ends torque settings head torque settings 10 mm bolts step 1 22 ft lbs. step 2 60 degrees step 3 additional 60 degrees 12 mm bolts step 1 26 ft lbs step 2 60 degrees step 3 additional 60 degrees
...bolts step 1 22 ft lbs step 2 additional 60 degrees step 3 additional 60 degrees 12 mm bolts step 1 26 ft lbs. step 2 additional 60 degrees step 3 additional 60 degrees exhaust manifold nut 32-41 ft ...
...as well as the torque specs I have listed. M10 bolts tighten to 22 foot lbs. M12 bolts tighten to 26 foot lbs. If you have any comments please feel free to leave them here. Hope this helps and
replace left front fender Replace left front fender - Fixya www.fixya.com/cars/t26028082-replace_left_front_fender Dec 29, 2015 - replace left front fender - Hyundai Motor 2003 Elantra question. ...
...Transmission, ..........4.6 pints 1. After refill check oil level. TORQUES Oil Drain Plug.....26-32 ft-lbs Manual Transmission Fill Plug.....22-25 ft-lbs Drain Plug.....22-25 ft-lbs Hope
30 Nm (300 kg.cm; 22 lb.ft) + (60°to 65°) + (60°to 65°) (M12) 35 Nm (350 kg.cm; 26 lb.ft) + (60°to 65°) + (60°to 65°
Question about Hyundai Elantra
...M10 bolts to 22 ft. lbs. (30 Nm), plus 60-65 degrees, plus 60-65 degrees. Tighten M12 bolts to 26 ft. lbs. (35 Nm), plus 60-65 degrees, plus 60-65 degrees.Hope this helps; also keep in mind that ...
653 questions posted
Usually answered in minutes!
1,180 Questions
1,029 Questions
656 Questions
508 Questions
493 Questions