2001 Hyundai Elantra "key fob doesnt work alarm" Questions

key fob ugh, this happened to me. tried a new battery in the fob, but it didnt work. the fob must've stopped transmitting signal properly. i tried unplugging the battery to 'reset' the security system

...key fob key fob doesnt work anymore. I use the key to enter but the alarm goes off every time. How can i stop the alarm from going off? pontiac2005 g6 Tracy: Have you replaced the battery in the fob? ...

...key Fob on car wont work from far away have to go up to drivers sensor on door so tried doing it with the key - opened with key and alarm should go off - it doesnt go off - lights all flash but no ...

Key fob won't work even after changing battery, can only open and lock car using key, alarm won't shut off and keeps ringing retry replacing battery new doesnt mean cant be defective if it is good ...

...fob and now cannot start the car without it. the alarm doesnt sound off, i just cant start the car whatsoever. i tried turning the key to the on position for 30-90 seconds, then to the left for 10 ...

fob .if no RF signal is read then the alarm will keep going off until it sees the signal . usually install key into ignition turn to run position engine off let sit for up to 10 minutes and alarm will

...key dongel does not work. how can I bypass the imobiliser fob doesnt control immobilizer key has security set up --fob is designed to open and lock doors and reset alarm ---and no bypass to ...

...97 i try withe keys by unlocking the passenger door but it doesnt work put key in ignition and turn it to reset or turn off alarm when you unlock with key not fob vehicle thinks its being broken ...

...key fob. You can get a key fob and have it programmed to your jeep, by an alarm shop. As for the overhead console, could just be a fuse blown or an electrical short. No way to tell except by checking ...

doesnt go off opening door only turning key to start I have tried: 1 Trickle charged battery to get power to try to disarm w key fobs. 2 Disconnected battery, waiting then reconnecting to try to reset