Question about Hyundai Elantra
...slave cylinder later and i still have this slipping issue .. it seems to go away for a short time if i bleed it out but then it comes right back.. it will shift fine and runs great then it will start ...
...slave cylinder on a 95 ford ranger The easiest way to deal with this problem is to order the complete preblead slave cylinder kit. You can, just go with a new slave cylinder but because of the age of ...
...slave cylinder rremove all brake hoses from cylindervthere are 2 bolts keeping it on remove bolts the remove cylinder replace is revers if dismantaling yhen you need to bleed the brakes the furthest ...
Question about Ford Cars & Trucks
slave cylinder on hydraulic clutch system 1987 Ford Ranger 4WDdo I have to prime slave cylinder with fluid before installing? If so, how do I do that? my slave cylinder mounts inside the bell housing.
...slave cylinder, keeps losing resistance on clutch pedal, repeatedly bled to get pressure again , how do I fix this problem ? Replace the clutch slave cylinder and re-bleed the system. It's pretty ...
...slave cylinder wont come up to presure i have bleed the master and slave cylinder after replacing the kits in both but the pressure keeps going away. when bleed there will be clutch there but 2 or 3 ...
...slave cylinder for a 1985 chevy Suburban 1.) fill resovior 2.) remove bolts connecting the slave cylinder to the bell housing, and remove slave cylinder (leave the line connected if possible)- if not ...
Question about Hyundai Elantra
...slave cylinder from tranny. (91 3000GT, mitsu) So I posted a week ago that I was having trouble with my mitsu 3000gt sl (91) manual clutch. I thought it was the slave or master cylinder, but no leaks ...
Question about Hyundai Elantra
slave cylinder, thru the bleeder screw while someone pumps and holds the clutch pedal, several times, or until no air comes out, remember to keep fluid resevoir full while bleeding. scott's answer is
...slave cylinder or Clutch Master cylinder. If you can keep pumping the pedal and then it will go into gear that means you have a problem with the hydrolic system.You have a cluth master cylinder and a ...
1,531 questions posted
Usually answered in minutes!
1,180 Questions
656 Questions
508 Questions
493 Questions
443 Questions