2000 Hyundai Elantra "put new slave cylinder clutch" Questions

...Someone says it might be my slave cylinder or something like that. Any ideas? You have to replace the Slave Cyl. when you put on the new one you have to bleed it ..To get the air out of the new

i put a new clutch in and it still releses at the floor Have you checked the master and slave cylinder fluid?

...new. told them to put it in anyway. about a month after the clutch was installed the issue returtned. tried another clutch thinking it was something with the kit .. so here i sit 2 clutches, and a ...

...new master, bolt it in and connect the linkage make sure the linkage is adjusted as close to the old one as you can leave the adjusting nut a little loose for know after it all connected leave line ...

put in new clutch and slave cylinder. no clutch pedal. how do you bleed the cylinder? put a new clutch and a new slave cylinder in a 1992 pontiac trans am. how do you bleed the slave cylinder, I have ...

...new ACT HDMM clutch put in about 2 months ago. my wife was driving the car like always and when she went to put it back in 1st at a stop light it wouldnt go in. the pedal feels stiff as ever having a ...

new slave cylinder, bleed clutch but gears still grind when trying to put into gear unless double clutched. Any other adjustments or suggestions for repair? [email protected] check and make shear

put new master cylinder in place but don't connect rod to clutch pedal or bolt it to bulk head and leave metal solace feed pipe undone , connect fluid feed pipe to cylinder then tilt cylinder so slsve

put it through all the gears. Why won't it move? Check your clutch fluid,if empty,then your clutch slave cylinder is bad.Your car is not a Plymouth,it's a Dodge.Here's a link replacing if bad. SAVE 20

...put a new clutch in my truck a couple of months ago. I was told at that time I might also need a slave cylinder. Yesterday, it started getting hard to change gears, and then would not engage. The ...