...clutch linkage,hydraulic clutch system,oil level in master cylinder,if its low or empty,check for leakage from master to slave cylinder at transmission release lever,repair and bleed system at
...oil contamination on the clutch plate. Both these problems can only be fully diagnosed once the gearbox is removed and the clutch is inspected. There is also a possibility of excessive wear, or ...
Question about Hyundai Elantra
...slave cylinder later and i still have this slipping issue .. it seems to go away for a short time if i bleed it out but then it comes right back.. it will shift fine and runs great then it will start ...
replace them as a pair Could either be a bad slave cylinder or clutch master cylinder. Look under the truck for oil leaking by the front of transmission. If oil in the front then slave cylinder is bad
...oil coming out of the slave cylinder ? Try cracking the bleed screw and gravity bleed the slave. Check the reservoir to ensure that you maintain adiquit oil in it, may push your air lock out, if that ...
Question about Hyundai Elantra
...slave cylinder. I have clutch oil leaking inside my truck off the rod that goes from the pedal to in the fire wall do I replace the master cylinder or the slave cylinder The master and slave are ...
...know if youre slave cylinder is bad loosing oil from the reservoir is the first suspicion oil at the slave cylinder rubber boot is the next one and no clutch releasing when foot on the pedal is ...
Question about Hyundai Elantra
...slave cylinder. Check for oil at the cylinder boot and if there are signs of it leaking then replace the cylinder. Consider doing both as the master cylinder does the same amount of work and will not ...
...oil is moving in the reservoir then the master slave is probably bad otherwise I would suspect the slave. I'm not an Isuzu technician. Some other Gurus could complement or correct my saying. Hope it ...
...if oil can get out then air can get in and the slave clinder can be bleed after the fact . Or thy bleeding the slave and if the problem goes away for a while then its the master and the slave is ...
1,531 questions posted
Usually answered in minutes!
1,180 Questions
656 Questions
508 Questions
493 Questions
443 Questions