2000 Hyundai Elantra "idle rpm" Questions

what is factory spec's for idle rpm what is factory spec's for idle rpm in [n] put the parking brake on  800 rpm.

rpm than that of idle speed. I've got Hyundai Lantra 1.6 year 2000. It's take time to start when it's hot. When I start my car it revs at about 2k-3k rpm. It also does it when I come to a stop. When I

idle will go up to 1200-1500 rpm. There are lots of places beside hoses that can leak vacuum such as the EGR valve or around intake manifold. But check that rpm's first to confirm what you are hearing

unstable rpm of hyundai elantra 1998 model rpm is not stable at idle spped CHECK IAC SENSOR,CLEAN THROTTLE BODY.

...IDLE SENSOR STILL DOING THE SAME THING. SOME PEOPLE TOLD ME TO CHANGE THROTTLE BODY. WHEN THE CAR WARMS ON IT DROPS FROM 4K RPM TO 2K RPMS BUT THAT IS STILL HIGH. ANY BODY HAVE ANY SOLUTIONS 1990 ...

...rpm, then goes down to 1500 or so then back up to 2000 and eventually settles where it should be at idle, around 800. The check engine light IS on but I don't have an OBD 2 scanner to read the codes ...

...rpm) when started and when shifting gears. The check engine light is on and the code points to a misfire on the second cylinder but new plugs and wires didnt work. Is this most likely a idle air ...

idle rpm goes down. Remove cruise control cable and throttle cable. Check if the idle rpm speed goes down. With ignition switch in on position, test the idle speed controller. Ground the Gray wire and

...rpm drops down again. If I hold the gas down, it will just rev up and down in 5 second intervals. Its below freezing outside... it doesn't seem like an electrical problem would cause this behavior. ...

...rpm below idle and shut off? As long as I am on the accelerator and keeping above 2-3000 rpm its fine. Drove fine last night, but didnt this afternoon. Have tried nothing to fix? If you're still ...