2002 Saturn VUE "wait start light quick" Questions

...start the car too quickly. It will shut off and the security light flashes. Thankfully it never happens when I'm on the road! I think it's related to the seatbelt switch. There's a wire under the ...

...wait a sec then start the car, that should reset your maintenance light. if it uses the honda reset. set odo to trip odometer A turn off the key, hold the reset button and turn the key to the run ...

start, or dies very quickly after it started, then leave the key in the ignition in the "ON" position and wait 10 minutes. Make sure the security light is flashing. After 10 minutes the security light

...wait to start light is not staying on. Also was hearing a clicking sound. Thought the glow plug relay was bad and when i replaced it the main hot terminal was broken. Put the relay in and same thing ...

...WILL FIRE OR START BUT NOT STAY RUNNING, REPLACED TIMING SENSOR AND FUEL FILTER, ACTS LIKE I TURNED OFF THE KEY. CLICKING SOUND WHILE WAITING FOR THE START ENGINE LIGHT TO GO OFF. test

...the key on, turn it to ACC (Lights and chime) wait 5 sec, then try to start. Most cars will start the fuel pump and pressurize the system for a quick start. Also check if you smell gas around the

...wait to start and all other lights come on. dome light switch works.replaced fuse and still no power to fuse need more info but fords are noted to have bad headlight switches;try wiggling the swith ...

...start. The wait to start light was not coming on at all, checked for power at the relay, had battery voltage at the large feed wire and with the key on there was battery voltage on one of the small ...

...come on, but do not start. Now pump the accelerator pedal three times quickly. The light will go off for another 3,000 miles disconect the battery and wait 30 secs reconect bat and light should be ...

start car Step 2 When you turn key to the on position wait for your 3 seconds before the flash then quickly turn the key to the off position. Step 3 Wait about 15 to 20 seconds Then repeat all steps A