2001 Land Rover Range Rover "cranking" Questions

...THE OBD2 SCAN PORT IS FIRST. THE CAR NEEDS SERVICE FOR SURE. the only tool less tests are fuses and cranking in neutral. just 1 eye and 1 hand does it. ok one more engine oil all leaked out. engine ...

Where is the crank position sensor in a 1996 Rang Rover P38 4.6? How do you replace the crank position sensor in a 1996 Rang Rover P38 4.6? Thanks In Advance For You Help. Greg sensor should be next ...

cranks but wont start i have a range rover 4.0, it was running fine untill the lait evening when i went to the grossery store. it cranks but wont start. checked the battery, its fine, checked the fuse

My 2003 range rover will not start but the radio is working Will not start,,,,,as in, it won't crank over, or it will crank over and it does not fire up? Your radio could work, but it will not crank ...

my 04 range rover refuse to start but the key turns Battery? If you could be a little more specific I might be able to point you in the right direction. No crank? Crank but no start?

when starting the truck sometimes it clicks like it needs a battery then the second time its cranks. Usually this points to these issues: 1) Bad battery cables-check by testing voltage drops across ...

bought car five days ago. when originally cranking rpm's would stay high and only go down once in gear. now when cranked rpm's are less than a thousand and oil light comes on and starts to run hot. ...

dont crank Maybe starter is shot if it's not cranking over. Or possibly your battery is out it's way out. May not have enough power to turn it over. Maybe try to jump it and see if that gets you ...

i have 2004 hse land rover and the will work and crank truck then once you turn it off the key will not turn unless you disconnect the battery and then reconnect it afther that the key will turn and ...

Hi, I have a 1998 Range Rover P38 and it takes up to 4 cranks to start the engine when cold. After the vehicle is warmed up it starts after the first crank. Any idea what the problem may be? Hi Servo,