2001 Land Rover Discovery Series II "parking brake lock pin" Questions

...brake pedal. $15.00 fix, or I thought so; still had the problem! Took it in for repairs and found out it was fuses after all... To get the parking lock to disengage you need to pull of the housing, ...

...brake light are 'really' coming on when you press the brake. You can also take the plastic housing, around the shifter handle, up and using a screwdriver move the locking pin out of the shifter

...brake, the end of the lock pin may have become jammed. Try two things: 1) Start the vehicle, put your foot on the brake, and attempt to move the shift lever from Park to Reverse. 2) If you cannot ...

...the pin is still locking out the shifter, the solenoid pulls that pin back. Check your brake lights, do they work? The brake light circuit supplies power to the park lock out solenoid u

lock pin in the steering column is eather bad or broken this also deals with the horn and sometimes the brakes if the brake peddle is pressed and there is no brake light check the brake switch buy the

...parking brake before, not after putting it in park. Never put your front tires against a curb and put it in park without letting the vehile roll away from the curb.. An don't hang you car on a slope ...

...Parking Brake Lever 8 2296 Brake Shoe Retracting Spring (Short) 9 2296 Brake Shoe Retracting Spring (Long) 10 2200 Rear Brake Shoe and Lining (Secondary) 11 ? Washer 12 2106 Parking Brake Lever Pin ...

...parking brake lever in -full released- position. Raise and support vehicle. Remove plug in parking brake shoe support to access adjuster star-wheel. Through the access hole, rotate the adjuster star ...

...parking while all other gears work fine If you apply the park brake before you select park and don't release the park brake until you have selected a gear you will find it easer to get out of park. ...

...parking brake cable or brake hose. Remove the inner and outer disc brake pads. To install: If installing new disc brake pads, use rear caliper piston adjuster T87P-2588-A or similar tool, to rotate ...