2000 Land Rover Discovery "tools needed replace oil pan" Questions

oil and filter, and new temperature gage. Now it overheats. Fan is working and the electric fan comes on once correct temperature is met. Could it be the fan clutch? All I can see at this point is the

REPLACE THE ENTIRE OIL PAN JUST FOR A STRIPPED OIL PAN BOLT ANY TOOL DEALER SNAP-ON OR MAC TOOLS FOR REFERENCE YOU CAN PURCHASE A OIL DRAIN PLUG REPAIR KIT FOR YOUR CAR/TRUCK IT IS VERY EASY TO DO AND

...oil pan. Once the engine is lifted, you can unbolt the oil pan and remove/replace it. Do be mindful of what sort of sockets you need as some Passats require special hex bolts tools or other odd

...mission has to0 be rtemoved to remove the oil pan per general motors there is new sealer available also the front and rear crankshaft seals should be replaced (need special tools to replace

...Oil Pan Replacement. Tools Required. J 39505 Torque ... Do you need to torque oil pan bolts? Engine oil pan bolts range in torque from seven foot-pounds to 22 ft-lb or more for large engines with ...

...replace the oil pan it self or just the oil pan seal? This can been a DYI job, depending on your experience working with cars. You will need a your basic tools. (Jack Stands, Jack, Oil Container, ...

...tools the task can be easily completed. ========= There are few help links with solutions to complete these task. I suggest you to refer these links and view its procedure. ------- Click the link ...

...replace the oil pan. did all oil drain ,did loosen bults to lift the engine slightly but it wont come out hello i need help please. 2 days on this Hi Evelyn.here's a link on your oil pan removal,it ...

oil, use the tool to remove the cartridge, replace it, screw the cover back on , screw drain plug back in, refill oil , start the car and check for leaks. To reset the "change oil" light, just key the

...tools and some patience, you can complete the job. Here are some steps you can follow to replace the upper oil pan: Disconnect the battery: Before you begin, make sure to disconnect the battery to ...