2000 Land Rover Discovery "fuse 2" Questions

2 fuse boxes. One is under the hood, in a black box just behind the battery. The second is to the left and below the steering wheel, behind the dashboard panel. There are two plastic slotted fasteners

FUSE BOX ON DISCOVERY 2 V8 4.0 OTHER THAN THE DASHBOARD ONE AND ENGINE FUSE BOX Just the two electrical boxes under the hood (both under black covers) and then you have the fuse box under the steering

Rear side brake lights won't work after fuses/bulbs replacement The rear brake lights on either side of my 98 Discovery LSE don't work only the cyclops does, even after I have replaced all of the ...

...fuse 2 and fuse 5 in the engine compartment box are out. Fuse 2 (15A) connects to the MAF sensor, air injection valve, purge control valve, camshaft position sensor, and each of those connect to the ...

2 it blows the brake light fuse so i've got no brake lights at all , i replace the fuse and it just does it again straight away. sounds like you have a short at one of the bulbs when press brake pedal

...the brake lights, check your brake light switch on the pedal. you can hotwire 2 of the wires together to see if it is your switch or not. Check the 2nd under hood fuse for the dash and running

...pump, if it has then the pump has gone, if not then check the in-line fuse in the fuse box. Chris Turn the key on for 2 mins then off. about 5 Times to prime the pump and the system. My TD5 ...

Fuse number 2 in the upper auxilliary fuse panel, rated at 30 amps.This panel is immediately above the main passenger cabin fuse panel, found behind the drivers side lower fascia panel. 4) If the fuse

...2 ends are close enough together that they can still make contact. Think of the link as a big fuse. If you don't have a link, you may have an inline fuse somewhere as well, possibly in the fuse block ...

...fuse box in my 96 land rover d1 There's 2 - 1 is under hood passenger-side upper fender-well, the other is under steering column - panel Driver side. Two large plastic screws, turn 1/2 way and panel ...