2000 Land Rover Discovery "changing rear ignition coils" Questions

Ad

Question about Land Rover Discovery

1 Answer

...ignition coils are kind of a difficult job, due to their location ; behind the intake manifold. If you follow your plug wires, you'll find two coil "blocks" on the rear side of your manifold. I say ...

Ad

Question about Land Rover Discovery

1 Answer

rear tire. You can see it through the wheel well. The fittings are very likely to be frozen so I would soak them with some penetrating oil before you try to loosen them. if it is not starting however,

Ad

Question about Land Rover Discovery

2 Answers

...the problem then repalce the coil pack and module assembly. here is the part # STANDARD MOTOR PRODUCTS Part # UF265 Rear; Ignition Coil and Module Assembly; Ignition Coil and Module Assembly ...

...rear sensor. i started using premium gas what else is there to look at. it won't stay off The most common cause that will trigger the P1320 code is the ignition coils, one or more ignition coils may ...

ignition coil pack on a 2001 Oldsmobile Intrigue? Is there any computer work that would need to be done as a result of the part change? Not hard at all. Seven bolts and one connector. No computer work

Question about Land Rover Discovery

1 Answer

...the problem next? Crank position sensor would be my guess. Its located the center, rear engine area, mounted in the block below the ignition coil pack and DIS module.My guess is that's your

Question about Land Rover Discovery

2 Answers

...ignition coil #5, P0138 is rear oxygen sensor voltage high (probably caused by the misfires), and P1687 I'm not sure about, but usually is related to the engine control computer internal fault ...

Question about Land Rover Discovery

1 Answer

...ignition wires to the correct coils.  If one is incorrect, you will have at least 2 cylinders that will misfire, and it is possible to have all 3 of them mixed up.Other than that, I would say ...

Question about Land Rover Discovery

2 Answers

...rear of the motor near the firewall down low,and a pain in the *** to change, To my knowledge depending on the engine you could either have distributor ignition or coil style ignition. There will be ...

Question about Land Rover Discovery

1 Answer

...rear of a pontiac aztec. What tools will I need and what instructions are there to help me. Thanks Gary It is REALLY simple. You wil need a 7mm socket wth an extension and ratchet or a nut-driver ...

Not finding what you are looking for?
Cars & Trucks Logo

281 questions posted

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...