...cooling system. Remove or disconnect the following: Negative battery cable Upper radiator hose Accessory drive belt Water pump pulley Accessory drive belt tensioner Idler pulley Crankshaft damper ...
...and bolt until snug. Install the serpentine belt. Tighten the water pump pulley bolts. Tighten the water pump pulley bolts to 18 ft. lbs. Fill the cooling system and purge of air.Inspect for
cooling system. Remove or disconnect the following: Negative battery cable. Fuel injector sight shield. Air cleaner intake duct. Right spark plug wires from the ignition control module and reposition.
Fill the engine and the transaxle with the proper types and quantities of oil. Fill the cooling system. Connect the negative battery cable, start the engine and check for leaks. Check all fluid levels
cooling system into a suitable container. Detach the heater inlet and throttle body heater hoses from water outlet. If accessible at this time, disconnect the upper radiator hose from the water outlet
...Cooling fan relay circuit open or shorted OR 35 idle switch motor fault - check connections 36 (turbo only) Wastegate control circuit open or shorted 37 Shift indicator light failure, 5-speed OR part ...
...air dissipate for about 10 minutes. Then take a gallon of water and pour on the fuel rail on both side of this engine, it is a V6. Make sure you are pour the water on the fuel rail, fuel regulator ...
...Cooling fan relay circuit open or shorted35 (trucks) idle switch motor fault - check connections36 (turbo) Wastegate control circuit open or shorted36 (3.9/5.2 RWD) solenoid coil circuit (air ...
258 questions posted
Usually answered in minutes!
195 Questions
185 Questions
13 Questions
2 Questions
23 Questions