...change the rear brake pads first, before I tried anything else. Worn pads or nonfunctioning adjusters are the likely culprit. If you do not want to repalce the rear brakes, you can find the ...
...rear brakes and will not go out. i tried to bleed the brakes and still on. Ok the reason I ask is that will help to pinpoint the concern. See ABS system when you first turn the ignition on will do a ...
...2004 Ford Focus estate and when I brake, my front lights come on (the rear brake lights also come on fine). Any ideas why this may be happening? I think this started following my MOT being completed ...
...rear lights. I discovered that all my center bulbs were burned out and the housing is somewhat melted as if the lights were on for a very long time. Replacing them has no effect as it seems there is ...
...change the front brake pads on an 03 ford focus? A socket set, possibly 14mm, a breaker bar or ratchet extension,( a piece of pipe will do), and a giant C-clamp. Pull the 2 bolts from the rear, pull ...
change rear wheel bearing is it hard to do ford fusion 03 Lightly losen the lug nuts with the tires on the the ground. Jack up the car and remove the tire according to the owner's manual. Make sure to
change the break pads for ford focus 2004 The following is from a tip I have posted for all cars but will work for yours, for removing the caliper bolt, a 7mm Allen wrench should be needed. First Here
brakes are applied or left turn signal. So it might be in the rear harness ... I would also inspect the left rear light assembly and the harness to it (possibly a bad ground) good luck and let me know
280 questions posted
Usually answered in minutes!
195 Questions
173 Questions
13 Questions
2 Questions
23 Questions
