2003 Hyundai Tiburon "unplugged coil harness running engine" Questions

Ad

Question about Hyundai Tiburon

3 Answers

...COIL RESISTANCE BETWEEN TERMINALS 2 & 3 SPEC IS 17 - 18 OHMS FOR 2.0 ENGINE WIRING TERMINAL LOCATION LOOKING INTO VEHICLE HARNESS AT VALVE SIDE OF CONNECTOR 2--3--1 2= ORG 12 VOLTS KEY ON ...

Ad

...harness disconnected (it won't work). If you are trying to TEST the coil, test it by very briefly applying 6V(DC) at the primary and check for high-voltage spark at the secondary at the moment you ...

Ad

Question about Hyundai Tiburon

2 Answers

...coil. Should be around 1 ohm. See diagram of plug. Also powered by ASD is the alternator field , unplug and run engine to test, and heated o2 sensors. I'm guessing at the resistance but it should be ...

...unplugged and the computer still reads map sensor but still bucks and stalls out sometimes. This generation of Caravans had a problem with the fuel injection wiring harness. The problem is excessive ...

Question about Hyundai Tiburon

1 Answer

...harness going to each bad coils connection, burnt, missrouted,unpluged at connector and propper voltage supply at plugin connector.Once this is varified replace coil and check for a good spark.I hop ...

Question about Hyundai Tiburon

1 Answer

...Coil,and that didn't do anything.I haven't any faith in this Mechanic now. Yesterday , i unplugged the wiring Harness leading to this Injector and Plugged it back in and it ran good for about 5 ...

coil,have spark,no pulse to the injectors,have power to the injector plug on both wires,check harness ground,tps.i don't know if the MAF sensor have something to do with this problem? I doubt it's

...coil and replaced it again thinking it might be bad and still have the same problem. I beleive all the connections on the plug appear to be good. Any suggestions what i could do next? thanks, Ken ...

harness) on the coil. To test the secondary resistance, connect an ohmmeter between the positive (+) coil terminal and the high voltage cable terminal on the coil. Then, measure the resistance between

coil is not recieving voltage from the pcm(ecm). Suggest you check the wiring harness for continuity. (Unplugged from ECM, of course!) These wiring harnesses have a bad rep for intermittent breaks, in

Not finding what you are looking for?
2003 Hyundai Tiburon Logo

1,337 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Hyundai Experts

Marvin
Marvin

Level 3 Expert

85161 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...