2001 Hyundai Accent "putting gas" Questions

...gas pedal check the fuel pump pressure after putting the petrol in and then it will not start as the pump could have a low pressure ,as the car runs the EVAP system is pressurising the tank making up ...

I have to hold the gas pump to put gas in my car. Is there air in the tank? You have an EVAP System Malfunction that will not allow you to fill the gas tank There are several electrical solenoid type ...

To put gas in my Hyundai takes forever. When I put gas in my car. The gas does not go down. It comes back and tripes the handle off. I must hoe the nozzle open very slow to fill up my car. This has ...

Gas shuts off every few seconds when filling gas tank While trying to put gas in at the pump, it constantly shuts off every few seconds. there is a vent tube that runs along side the fuel tank fill ...

Can not pumb Gas into Hyundai 2001 accent While I'm trying to pump gas into my 2001 Accent, the pumping constantly stops as if the tank is full. I have to hold the handle of the gas pumb slightly in ...

...putting gas in tank; already have changed fuel filter Hello I'v seen this problem before when your putting gas in the car it stops the pump. The filler neck on the car has a vent tube in side of the ...

I just buy a used hyundai 2000 I love my little car, but I notes that when I put gas on it; the gas cannot go fluid, you know like when is full and the handle of the gas pump kick you out and it takes

slow filling of the gas tank If I attempt to fill with the full flow of the pump, the pump shuts off. I must use just a tiny bit of handle pressure and it takes about 10 minutes to put 9 gallons of ...

car won t start after filling gas tank When I my 2006 Hyundai Accent gls to the gas station toll it up it was fine. A soon as the gas was put in and the gas cap was put on, I tried to start my r. I ...

how to put in a fuel pump in a 02 hyundai accent take loose all the plugs and your filler neck to your gas tank off then drop the gas tank after you do that get a flat head screw driver and put it on ...