2001 Hyundai Accent "intake manifold" Questions

...intake manifold of the Hyundai Accent. Pull the intake tube off the intake manifold and inspect it for cracks. If any cracks are present, then you need a new thermostat intake tube. 3. Pull the old ...

how much time to replace intake manifold gasket? intake manifold gasket if you have never don it before -- but are handy with tools -- about 3 hours maybe 3 1/2. if you have all the correct tools.

intake manifold gasket on a 2001 accent intake manifold gasket (2001 accent gl) How do i get to it? what does it look like? how do i replace it? if you don't even know what it looks like, please take ...

...intake manifold. Or an obvious hissing noise at a normal idle. If so replace or repair clear codes your done. If not obvious take carb cleaner spray with nozzle attached car running & go over all ...

arm shaft bolts 15-20 ft lbs. intake manifold bolts 11-15 ft lbs. exhaust manifold bolts 22-30 ft lbs. valve cover bolts 79-81 in lbs. how many bolts hold down rocker arm shafts on 1997 hyundai accent

...intake hose (this is the hose that goes from the airbox to the inlet manifold) for a 2001 Hyundai Accent but I cant find the part number anywhere and I also don't know where to get one. Could anyone ...

...ALSO MOUNTED TO THE INTAKE AIR HOSE OF THE AIR CLEANER ASSEMBLY. O2 SENSORS LOCATION.YOU HAVE 2 # O2 SENSORS.YOU HAVE ONE THE EXHAUST MANIFOLD.THE OTHER SENSOR LOCATED DOWN AT THE CATALYTIC

intake manifold, nearest the firewall, between the throttle cable mount and the stainless steel grounding cable on the back of the engine.Open the glove compartment. There are two locks located on the

...putting in gas fuel pump DOES NOT SHUT OFF.... you have a purge control solenoid valve that's sticking 'OPEN' an sucking raw fuel into the intake manifold... REPLACE THE PURGE CONTROL SOLENOID

were is the PCV valve on a 2001 hyundai accent 1.6l It must be located on side of the intake manifold, touching the cable tubing going to the right wiper motor.