1997 Geo Tracker 2 Door "cant remove key lock cylinder" Questions

Ad

Cant start the car! Is there a trick to getting the little broken key out? Remove the lock cylinder housing, and try to get it out that way. Otherwise, get a new lock cylinder. the tracker is a vitara

Ad

Question about Geo Tracker

1 Answer

cant get the thing to turn. is theres button somewere that lets yoou do this REMOVAL On models equipped with airbag, disarm airbag as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING. On

Ad

cant get keylock cylinder to seat.and.lock. Looks like plastic "pin" in key cylinder and plastic pin in housing. Ignition switch actuator pin? Check to see that the cylinders are exactly the same. Try

...cant afford a locksmith or dealer. Any way around this? before you drill it tap the end of the lock cylinder where the key goes in with the handle end of a large screwdriver. try different levels of ...

...my daughter grand am stole factory stereo and now her key wont turn switch, need help removing dash mount lock cylinder. i bought a new one, but cant get the old one out you need to remove old

Question about Geo Tracker

5 Answers

...Remove the key from the switch. Attach the electrical connectors to the ignition switch. Install the instrument cluster using the procedures found in this section. Install the heater & A/C control ...

...remove a locked key lock cylinder if i cant turn to the on position The ignition needs to be in the ON position to be removed, if you can not turn it at all you will need to drill it out in order to ...

...cant remove the old one because the cylinder wont turn Try turning the steering wheel while trying to turn the ignition. Didn't work? Can you remove the key? Use some WD40 with the tube and spray a ...

...cant remove the lock cylinder by normal means...then youll also need the cylinder...and it will have to be recoded to the vehicle so the anti theft will allow the new keys/cylinder to start the car. ...

Question about Geo Tracker

1 Answer

...cant gvet the covers off around the lock cylinder I hope this helps....these are the steps to removing and replacing the cylinder: Remove the knee bolster. Remove the steering column trim covers from ...

Not finding what you are looking for?
1997 Geo Tracker 2 Door Logo

86 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1995 Geo Tracker
1995 Geo Tracker

350 Questions

1993 Geo Tracker
1993 Geo Tracker

207 Questions

1992 Geo Tracker
1992 Geo Tracker

191 Questions

1994 Geo Tracker
1994 Geo Tracker

187 Questions

Top Geo Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...