2006 Hyundai Accent "rough idle replacing timing belt" Questions

...this many times, With an advanced timing belt, it will run well, if not better than normal at cruising speeds but can cause stalling at low RPM, erratic idle, rough idle, lake of power from take

...timing belt and got everthing to TDC but ow it is runing rough and thereis a knock in the motor. is there a way to tell if i have damaged rod(s)or damaged valve(s)with out tearing it apart first? if ...

timing belt broke i replaced the belt got everything to TDC and it started but there is a knocking sound and it wouldnt stay idling unless i kept my foot on the gas (it is running rough) somebody told

idle - one must give gas pedal pressure - and produces very little power. I have crawled under the car but I can find no evidence of burnt rubber, and the source of the smell is still a mystery to me.

...rough idle!! normally you would change the cambelt after so many miles Mine are always changed after 30k miles regardless. The mechanic was purley guessing. If the idle is rough then it will be an ...

rough idle problem hot or cold. or both what is RPM at rough idle, too low,, below 800 rpm? its misfire, do a tune up. have a 2005 pt cruiser just replaced timing belt and now has a rough idle

...and stalls during regular driving pcv hose Probably the timing belt jumped. If you have over 100,000 KM it needs replacing. Hope this helps. When timing is out, it will idle high and rough.. :-) ...

...idle rough and stall? Thanks in advance! Dirty or disconnected IAC (Idle air control) valve, dirty mass air meter (Maf) or being slightly out of time can all cause idle/stall issues. Vacuum Leaks Egr ...

Rough and noisy idle I bought a 2000 sportage that the timing belt broke and had set there for awhile. I installed a new timing belt and pulleys.The compression on each cyl was 140 psi.It makig a ...

...rough idle (sometimes stalling), no engine code I thought maybe it was tensioner pulley, but I have replaced this. The van is making high pitch squeeling noise and won't stay running on its ...