2000 Saturn SL "dlc connector fuse car" Questions

...your security light is not on. Also check the ecm/pcm fuse,all igntion fuses, and the auxillary and cigarette lighter fuse. One of these will power the DLC connector, retry reading the computer. ...

...dlc connector so scaner won't read codes Fuse #5 10A Data Link Connector (DLC) located in. Passenger compartment fuse panel The fuse panel is located on the left hand side of the instrument panel ...

DLC connector for B+ voltage . If no B+ voltage check to see if CIGAR fuse #13 20 amp is blown , location under hood fuse box . Do you know what the DLC connector is ? It's what you hook the scan tool

...DLC connector pins and what they do, check that pin 16 is always hot with 12 volts. If no voltage is present check the fuse for the cigar lighter or interior lights. Pin 16 at the DLC is powered ...

DLC connector doesnt get any power when connected to a diagnostic tool check the fuses for the power outlet/cigarette lighter. The DLC usually gets its power from that fuse.

...is for cigarette lighter on toyota lucida It's the same fuse that powers the DLC (Data connector). Pop the cover top center of the dash board and check for power between pins 8 and 16 on the ...

you Data Link Connector (DLC).  If the DLC has no power, the computer scanner will not communicate with the engine computer.Check Fuse #7 (25 Amp) in the instrument panel fuse block. (See diagram

...DLC, and it says "operator error" (cannot communicate with computer). I checked all the fuses, and they're all good. Check terminal #16 (see diagram of connector) of the ...

...for the DLC in a deville 2000 Typically the data link connector gets its power from the cigar fuse. On your vehicle there is a fuse in the underhood fuse block labeled ALDL (assembly line data

...link connector (DLC) inside the fuse box. you hook up an OBD code reader to this DLC and it will communicate with the engine computer and retrieve stored trouble codes in the computer´s