2000 Saturn SL "1 start" Questions

start. this remedy has quit working and i was wondering what suggestions u could give me Here you go: Interior: http://i200.photobucket.com/albums/aa75/lowsaturn/Car%20Stuff/98IPJB-1.gif and underhood

...start but smokes and gas milage is terrible. Check engine light came on and the code came back as crankshaft position sensor/misfire on cylindar 1. replaced sensor and nothing changed. have also ...

start after it stalls untill about 5-10 minutes My 99 saturn sl will stalls after 5 minuts of running during idle or runing and I have to wait 5 hours before it starts again I have changed plugs wires

1 cylinder is the first one in the back of the engine starting fron the left, #2 is the first one in front on the left #3 is the center one in the back #4 is the center one in the front #5 is the last

...start for 1 hour after driving for 10-12 min and then shutting down the engine. I got my battery and alternator check. Please help me if somebody can tell me what you think the problem could be. One ...

...blue. I could start it and it runs a few seconds and dies. Changed fuel filter and pump. Runs with #1 inj. unplugged. What's wrong? I'm rather guessing, but the #1 injector could be shorted to

...1/2 HOUR IT WOULD START AGAIN AND THEN BE OK FOR THE REMAINDER OF THE DAY. LATELY ITS BEEN STALLING EACH TIME YOU DRIVE IT. AGAIN IF YOU LET IT SIT AND COOL OFF IT WILL START AGAIN BUT THEN STALL ...

...1 misfire and after all that still codeing run roug at start it will run better after warmed up check engine light goes on and off i am completely frustrated could be getting oil down in #1 cyl. ...

...1) Leave the cables attached for a while before you attempt to start it. (Let it charge a bit) 2) When you go to start the car have the person giving you a jump rev their engine. 3) The obvious ...

...start. Can someone please help me??? 1. Test the AC voltage output from the Crankshaft Position (CKP) sensor while cranking at a normal speed. It should produce at least 250 millivolts. 2. Retest the ...