...sl1. after much research i found that it was the intake gasket. The problem is usually a folded corner on the gasket. if you try spraying some carb cleaner around the base of the intake while it is ...
sl1 idles at 2000 rpm in park intake manifold gasket needs to be replaced. i would seek professional help as this is a pain to do yourself
Hesitation when idling Pulling when accelerating Its an sl1 or an sl correct it is a single cam engine correct. Its the intake gasket
...SL1 manual shift Saturn. I recently changed the radiator hoses, installed new spark plugs and wires. The engine now idles at 1700 rpm when first turned on and settles at 1100 to 1200 when warm. What ...
...sl1. i cleaned out the intake manifold and throttle body, replaced all the gaskets and now it idles at 3000 rpms. what could cause this? Cleaning it out has nothing to do with it. IAC does which ...
...SL1 manual. I've replaced the IAC, PCV, and TPS. I'm still getting idle levels between 2,500-3,000 RPMs. The car runs fine other than when idling but it gets really loud at every stop light!! Any ...
...intake manifold gasket. This is a very common problem with the SL/SL1 engine. There are only three bolts around the #1 cylinder and no bridge in the block between #1 and #2 cylinders. The flexible ...
...SL1 HAS NO PICK UP WHEN YOU ARE DRIVING, WHEN YOU ARE AT A STOP AND GO TO TAKE OFF SOMETHIMES IT WILL PICK UP SPEED GREAT AND OTHER TIMES NOTHING . I am not a car expert by any means, but sounds like ...
SL1 check engine light came on and code P0303 which is Cylinder 3 misfire detected. I changed the spark plug and spark plug wire and still P0303 comes up. Is there something else I should be checking?
...SL1 I am experiencing very high idle (2000 rpm warm - higher cold). I have cleaned the throttle body and the idle air control valve with no improvement. What next, replace the idle air control valve? ...
1,795 questions posted
Usually answered in minutes!
953 Questions
963 Questions
862 Questions
606 Questions
85 Questions
