1996 Geo Prizm "clutch pedal soft" Questions

...clutch pedal I have a 92 celica st with 1.6 L engine. My clutch pedal sits low, feels soft and I need to pump it to put the gear in, do I need to replace a clutch or is it something else ? well ...

clutch pedal goes soft then csnt change gear then pump pedal pedal goes back to normal drive for a short while then clutch pedal goes soft again and just repeats as above just bought today was fine on

...clutch pedal feel, slipping clutch, unintended clutch release, hard gear engagement, no/insufficient clutch movement. *2. Clutch pedal Mounting Plate (possibly cracked)-this will cause improper gear ...

clutch pedal went soft clutch started squealing when depressed. then it went soft and lost pressure in the pedal. it wont go into gear. some of these were manual clutch cable check adjustment of cable

...Clutch Pedal, 1995 Rodeo 2W 2.6L I've been fighting a Soft Clutch pedal for a few months. The Master Cylinder, Clutch, Pressure Plate and Release Bearing were changed a year ago. I have the Master ...

...clutch pedal, you have a problem with either the clutch master cylinder or clutch slave cylinder, which these two parts work together to release the pressure plate, and allow you to shift gears, and ...

...clutch pedal, check the reservoir for fluid. If there's plenty of fluid, and you still have a poor pedal (soft, mushy, won't disengage all the way, clutch slips with no foot on the pedal etc...) you ...

...clutch pedal of my Toyota Hilux kzte 2004 does not want to release on its own. The pedal does not release on its own. I assume that means that the clutch does not engage/disengage when you press and ...

...clutch pedal i had a new clutch installed in alero now the clutch pedal is soft and has low resistance. is this normal for new clutch? my mechanic says it is but dont really trust his opinion. After ...

clutch pedal is soft and have to pump pedal for gear change clutch pedal is soft and has to be pumped to be hardened to be able to change a gear bleed the air out of the clutch slave cylinder . Check ...