1994 Geo Prizm "brake bleeding" Questions

...bleeding. Were you to push the brake pedal all the way to the floor, the push rod or piston in the master will travel beyond its normal movement. The inner seals then travel over a portion of the ...

Why would I not have brakes ? I have replace the brakes , brake master cylinder, brake calliopes, and drums If installed correctly did you bleed the brakes properly if you have replaced all these ...

soft brake pedal I have a 1996 geo prizm I had a problem with the brake pedal sticking and replaced the caliper and bleed the brakes but now the pedal is soft and sometimes i get good breaking and ...

Is there a way to bleed the clutch. It's not slipping but I have to pump the clutch pedal to shift. The fluid was really low so I thought air might be in the lines. You can open the bleed screw ...

after changing rear brakes, brake light stays on on the dash...how do i fix that? Bleed the brake system

...39;nt shift. I got it home and a friend came by and said it needed gear oil. It was empty so he put brake fluid in it. I got it going ok then but now when I try to drive it, its like the clutch ...

My brake peddle is to the floor. Can hardly stop. Is it the brakeline/ Do not drive the vehicle until it has been repaired. You will endanger your own life and others. The problem could be worn out ...

...brake bleeding sequence for my 95 prizm? How do I know if the brake lines need to be repaired? Just had my fuel line repaired. Could I have damaged brake line in process? Because now my brakes don't ...

...brake pedal gets really soft and you have to push it almost to the floor for the brakes to engage. I tried bleeding the brakes again and that fixed the problem, but it is now back to being soft. Do I ...

...to see why the hand brake is not working, may just be adjustment. or worn pads or shoes. Not familiar with the vehicle. You should be able to buy a brake bleeding kit which makes the job