2003 Jeep Wrangler "replacing stalk" Questions

high beam indicator light on, no low beams only high beams 2003 jeep wrangler Replace the dimmer switch.  Contact may be fused together if the column stalk switch has no effect.

driving lights The driving lights on yhe bumper go on and off at will.Can't find the problem. The next time they are on try pushing in on the switch. If just a little pressure turns them off and as ...

I have a 2008 jeep wrangler and the headlights, indicators and wipers are not working. I tried cleaning the ground lugs on the vehicle as well as swapping out the left multifunction switch and still n

turn signal return left turn signal will not return. Is this a dealer repair only. [email protected] if you can use a screwdriver and find a repacement indicator stalk assembly you can fix it ...

Headlights flicker on / off when touching indicator stalk Replace stalk this may be open circuiting when stalk is wiggled

why would my wipers not work then all of a sudden they start again in my2014 dodge ram 1500 SPOOKS maybe Could be a faulty relay or a bad spot on the motor. If the wiper switch is on the steering ...

wiper switch replacement try wreckers that wreck your make of car and replace the whole wiper stalk and switch . Had problem myself with indicator switch so much easier to replace the whole stalk from

After about 20 to 30 minutes of driving the headlights go out. Playing around with the hi-lo beam stalk brings them back on temporarily. I replaced the stalk (multi-switch), but problem still exists. ...

...Stalk is possibly the issue. Try replacing the switch assembly for a new one and see if that improves things. The switch sets are not normally very expensive. Got exactly the same problem on a 2014 ...

only blue icon seen. what is the problem? The Stalk is faulty/sticking and will require replacing,also check the Headlamp Dip/Main beam Relay in the Engine fusebox,it might pay to replace this as well