...tell them the issue and ask if there is a shorter drive belt that will allow you to bypass the AC compressor pulley if you cant get a belt witout ac there a pulley that part store sell that replace ...
Question about Nissan Cars & Trucks
...tell. After recharging the system to check for the leak again, the compressor seized up. The pulley spins, but the center shaft is frozen. I suggest you replace the compressor and both hoses / lines ...
the fact the accessories use one belt, I doubt you can bypass it.You may have to get a used compressor to be able to run the belt.Auto parts stores can tell you how many models use the same compressor
...tell what might be causing this? Plus before that happened the A/C would make a squeeking noise at the begining and then the noise would clear? the AC compressor was starting to wear (noise) now it ...
COMPRESSOR AND ON YOUR WAY You need to get a cloth tape measure (seamstress style) and run over pulleys you want to route belt. Get that measurement and any auto parts store can fix you up. CALL
...tell you anything about the condition of the compressor, but the compressor clutch is what goes first. With no oil, it won't come on, so, go to walmart, ( this is the cheap fix), get one of those 18 ...
Question about Honda Accord
...compressor turns freely by hand so it is not seized up.I am trying to recharge the system with r134a plus leak sealer. It is completely empty. you should be able to run a jumper on the low pressure ...
...Compressor. If you go to your local parts store and ask for a belt for that model car they will ask if it has air conditioning or not, tell them that it does but you want the belt for the non air ...
tell me is it hard to change . Not hard but you will need a special clutch pack puller to do the job. . Undo the nut on the shaft, screw in the pullet and tighten up the bolt and the lot will come off
...on padel ac system works and cools very well. It's your automatic A/C Clutch bearing. The computer tells the clutch to engage and it connects to the compressor but the bearing is shot and attempts
3,891 questions posted
Usually answered in minutes!
2,681 Questions
1,631 Questions
1,636 Questions
1,570 Questions
1,470 Questions
