...engine. Your new clutch kit will have instructions and an alignment tool in the package to complete the clutch install. Then slap it back together. Could take 5 hours your first time, about 2.5 next ...
...new engine mounting bracket. Torque the fasteners to 40-68 Nm (30-50 ft lbs.). Install the idler pulley to the engine mounting bracket. Torque the fastener to 40-68 Nm (30-50 ft lbs.) Properly route ...
...engine mount bolts loosely on the block. Leave them loose during so that the mounts can be more easily aligned with the frame mount brackets. A rolling head prybar is handy when aligning mounts. use ...
...Engine A New Life With A Motor Mount Replacement A Motor Mount acts as a security mechanism for the engines, minimizing the adverse effects of frequent vibrations and oscillations that arise when ...
...and install new one through the same. reinstall 6 millimeter bolt. Switch is self aligning. Reinstall belt, engine mount, air box. Doing this myself probably saved me about $150.00 to $200.00 ...
Question about Honda CRX
...new gasket(s). Remove the engine crankshaft pulley bolt and pulley. Using SST 09249-63010, or equivalent, install the mounting bolts for the right-hand mounting bracket. Tighten the mounting bolts to ...
...new, alignment, half shafts, bearings and ball joints all replaced. Still vibrates at 50mph and higher Check for play in the steering rack and tie rod ends. How about engine mounts, have they been ...
...engine mount not long ago which gave the same symptom. The tires are new and have been checked again. The front end alignment was checked including the suspension. It shakes only on the acceleration ...
...new one. Lower the engine until you can install the 4 nuts even with the ends of the studs (refer to items 2 and 3). DO NOT TIGHTEN AT THIS TIME. Repeat items 4 & 5 for the other mount. Carefully ...
Question about Honda CRX
...engine compartment where the strut is mounted there are 3 bolts that are concentric so that by moving that mounting plate in a circle to new holes position the top of the strut is moved forward ...
102 questions posted
Usually answered in minutes!