1998 Subaru Legacy "ups flashing battery bar" Questions

...bar. (Real mechanics should get a chuckle out of that.) In replacing the bolts, they really should be torqued to specifications, but I used the "pretty tight plus a half turn" approach. Hard to ...

...flashing check battery and check engine the fuel gage is flashing two bars at the top and one bar at the bottom. the water temperature and increased by one bar. the car has been making a loud noise ...

bar flashes while the ignition is on and running. It doesn't allow my ac to blow cold air. It is stuck on hot. What do you think is the problem? My ac works for sure. need new A/C controler in

...flashing. There will be a 3 minute dead/reset period between each unsuccessful start attempt. i have impala 2001 it has 36k mile and security light sometimes light on haw can i make it off make sure ...

...bar operates o.k.. also only operate this top with the car running and the windows up. If it still won't work I would suggest having the car scanned for codes. You can try disconnecting the negative ...

I recently took my car apart, replaced the rod barring and head gaskets and also the motor mound. We put everything back together replaced the spark plugs. The car don't want to turn over and start, I

...battery wasn't supplying enough power to the speedo and it'd explain that and everything else. I don't know if it's an electrical issue or what because the whole unit isn't flashing on and off, just ...

...bar and window relay-module is located behind passenger seat compartment on the floor. You must re syn windows before soft top will work. I have seen alot of these soft top modules go bad from jump ...

...battery posts and terminals to shiny clean and tighten securely. Check for loose rusty earth wire connections . Check that all terminals are tight and that includes the wires on any relays . have the ...

...battery negative wire for 30 seconds...remember to reset your clock and radio settings... sorry that is all I can find...please rate me solved hprice is right. when you get this code it's usually ...